Protec-it Cover Fleece 120 g/m², 1 × 50 m

Protec-it Protective Fleece 120 g/m² – 1 m × 50 m

Non-slip protective fleece for painting, renovations and construction sites

Protec-it protective fleece protects dry floors and suitable objects from mechanical damage and soiling during painting, renovations and construction work. The protective fleece consists of 100% polyester fleece with a grammage of 120 g/m². According to the product specifications, the integrated film prevents liquids such as water and paint from penetrating.

With a width of 1 m and a length of 50 m, the Protec-it protective fleece is suitable for versatile covering work indoors. It can be laid out in rolls and reused if kept clean.

Protec-it protective fleece for floors and objects

During renovations and painting work, sensitive surfaces must be reliably covered. The Protec-it protective fleece 120 g/m² can be quickly laid out and is suitable for various dry floor coverings and objects.

• Parquet and laminate
• Carpets and tiles
• Suitable plastic floor coverings
• Stairs with handrails
• Furniture, windows and doors

Protection against water, paint and mechanical impact

The Protec-it protective fleece combines a polyester fleece backing with an integrated film. This is intended to prevent liquids such as water and paint from penetrating the floor underneath. At the same time, the protective fleece protects suitable surfaces from mechanical damage during work.

For larger quantities of liquid or particularly sensitive floor coverings, the protective effect should be checked in advance. The complete waterproofing of the entire covering system is not guaranteed.

Non-slip and reusable

Protec-it is designed for non-slip use. For the material to be reused, it must be clean and undamaged. Before each reuse, it should be checked whether the fleece is still suitable for the respective substrate.

Technical specifications of the Protec-it protective fleece

Processing and laying

For reliable protection, the rolls of Protec-it protective fleece should be carefully laid out and joined at the seams.

• Check the substrate: The floor must be dry and suitable for the protective fleece.
• Lay out the rolls: Lay Protec-it rolls over the area to be protected.
• Maintain overlap: The rolls should overlap by approximately 5 cm.
• Seal the seams: Seal tightly with suitable adhesive tape, for example concrete mesh tape.
• Reuse: Only reuse clean and undamaged material.
• Perform a preliminary test: For sensitive surfaces, test suitability in advance on an inconspicuous area.

Important application notes

The suitability of Protec-it depends on the substrate and the intended purpose. Loose edges, folds and shifting should be avoided to reduce tripping hazards. The processing instructions must be observed before application.

Frequently asked questions about Protec-it

Buy Protec-it protective fleece at Baustore

With the Protec-it protective fleece 120 g/m², you get a practical solution for covering dry floors and suitable objects during renovation and painting work. The 50 m² roll is easy to lay out and can be reused if kept clean.

The information corresponds to the current stage of development and does not claim to be complete. Professional processing and the success of the processing are beyond our control. A warranty can therefore only be assumed for the quality of the product, not however for the processing. It is the responsibility of the user to determine the suitability of the product for the intended purpose. Preliminary tests are recommended.