Wie viel Gewicht kann der EDMA Plattenheber tragen?

Der Plattenheber hat eine maximale Traglast von 80 kg.

Wie gross dürfen die Platten sein?

Die maximale Plattengrösse beträgt 1,20 × 3,60 m. Die minimale angegebene Plattengrösse beträgt 0,15 × 0,60 m.

Wie hoch kann der Plattenlift heben?

Mit Verlängerung erreicht der Plattenheber eine maximale Hubhöhe von 4,5 m. Ohne Verlängerung beträgt die maximale Hubhöhe 3,5 m.

Kann der Plattenheber für Decken und Wände verwendet werden?

Ja. Der Plattenheber ist für die horizontale Deckenmontage, die Montage unter Dachschrägen und die vertikale Wandmontage geeignet.

Kann der Plattenlift durch Türrahmen geschoben werden?

Ja. Durch das Einklappen der beiden Standfüsse lässt sich der Radstand auf 0,63 m reduzieren. Dadurch ist ein Verschieben durch Türrahmen ohne Demontage möglich.

Wie viele Räder haben Bremsen?

Der Plattenheber verfügt über drei Räder. Zwei der drei Räder sind mit Bremsen ausgestattet.

Wie schwer ist der EDMA Plattenheber?

Das Gesamtgewicht des Plattenhebers beträgt 53 kg.

Tippen Sie auf die kleinen Bilder, um sie grösser zu sehen.

Baustore

EDMA Panel Hoist – Board Lift for Plasterboard & Drywall

SKU: 9.254

(0)

Fr. 1'129.00 inkl. MwSt.

In stock

Normalerweise innerhalb 24 Stunden versandbereit

Gratisversand ab Fr. 100.-

100% sichere Zahlung

Bestes Preis- und Leistungsverhältnis

Haben Sie Fragen?

Kontaktieren Sie uns jederzeit gerne

Fragen Sie unsere Experten

Email 081 / 740 08 09

EDMA Panel Hoist – Panel lift for drywall and plasterboard

The EDMA panel hoist facilitates the installation of plasterboard panels and other boards in drywall construction. With the panel lift, boards can be positioned and installed horizontally on ceilings, on sloped ceilings, and vertically on walls.

Panel lift for easy panel installation

The EDMA panel hoist allows for the lifting and positioning of boards with minimal physical effort. The panel lift makes work significantly easier, especially during the ceiling installation of plasterboard panels, as the board can be safely brought to the desired installation height.

The panel hoist is suitable for horizontal ceiling installation, installation under sloped ceilings, and vertical wall installation. With a maximum load capacity of 80 kg, it can accommodate panels up to a size of 1.20 × 3.60 m.

Up to 4.5 m lifting height:

With the extension, the EDMA panel hoist reaches a maximum lifting height of 4.5 m. Without the extension, the maximum lifting height is 3.5 m.

For ceiling, wall, and sloped roof applications

The panel lift is designed for various installation situations in drywall construction. This allows the same panel hoist to be used for different mounting scenarios.

Ceiling installation: Lift and position panels horizontally
Sloped ceilings: Install panels on inclines
Wall installation: Position panels vertically
Maximum load capacity 80 kg
For panels up to 1.20 × 3.60 m
Maximum lifting height of 4.5 m with extension

Narrow wheelbase for easy transport

A practical feature of the EDMA panel hoist is the two foldable support legs. This allows the wheelbase to be reduced to approximately 63 cm. Consequently, the panel lift can be moved through door frames without needing to be disassembled.

The panel hoist has three wheels, with two of the three wheels equipped with brakes. In working position, the maximum wheelbase is 1.25 m and the minimum wheelbase is 1.06 m.

Practical on the construction site:

With the support legs folded, the wheelbase reduces to only 0.63 m. This allows the panel lift to be moved through door frames without disassembly.

Technical data

Feature	Specification
Max. load capacity	80 kg
Max. panel size	1.20 × 3.60 m
Min. panel size	0.15 × 0.60 m
Max. lifting height incl. extension	4.5 m
Max. lifting height without extension	3.5 m
Minimum height	1.61 m
Max. height for vertical installation of 2.5 m panels	5.75 m
Loading height	84 cm
Max. wheelbase in working position	1.25 m
Min. wheelbase in working position	1.06 m
Min. wheelbase with folded legs	0.63 m
Total weight	53 kg

EDMA panel hoist for drywall construction

The EDMA panel lift provides practical support during the installation of large and heavy boards. Especially for overhead work or work at greater heights, positioning panels can be made significantly easier with a suitable panel hoist.

Combining a high load capacity, large panel accommodation, a lifting height of up to 4.5 m, and a foldable chassis, this panel hoist is suitable for a wide range of installation tasks in drywall construction.

Our tip:

For the regular installation of plasterboard panels on ceilings, walls, or sloped ceilings, the EDMA panel hoist offers a versatile solution for lifting and positioning the boards.

Frequently asked questions about the EDMA panel hoist

How much weight can the EDMA panel hoist carry?

The panel hoist has a maximum load capacity of 80 kg.

How large can the panels be?

The maximum panel size is 1.20 × 3.60 m. The minimum specified panel size is 0.15 × 0.60 m.

How high can the panel lift raise?

With the extension, the panel hoist reaches a maximum lifting height of 4.5 m. Without the extension, the maximum lifting height is 3.5 m.

Can the panel hoist be used for ceilings and walls?

Yes. The panel hoist is suitable for horizontal ceiling installation, installation under sloped ceilings, and vertical wall installation.

Can the panel lift be pushed through door frames?

Yes. By folding in the two support legs, the wheelbase can be reduced to 0.63 m. This allows it to be moved through door frames without disassembly.

How many wheels have brakes?

The panel hoist has three wheels. Two of the three wheels are equipped with brakes.

How heavy is the EDMA panel hoist?

The total weight of the panel hoist is 53 kg.

Language