Couldn't load pickup availability
Haben Sie Fragen?
Fragen Sie unsere Experten
Digital material moisture meter for non-destructive moisture measurement of wood and building materials
The WDH-318KC moisture indicator is a precise digital material moisture meter for fast and non-destructive measurement of moisture in wood, walls, ceilings, floors, and masonry. With a measuring depth of up to 20 mm, a digital LCD screen with backlight, and a clear LED bar graph, moisture distribution can be checked reliably.
The compact WDH-318KC moisture meter is particularly suitable for tradespeople, construction companies, expert surveyors, restoration firms, and DIY enthusiasts. It enables quick spot checks directly on-site without damaging the material through drilling or measuring probes.
The WDH-318KC uses a non-destructive high-frequency measurement method. This allows moisture levels to be checked without damaging the surface of walls, floors, ceilings, or wooden parts.
This is a major advantage, especially for high-quality surfaces, finished interiors, and existing buildings. Unlike measuring devices with insertion electrodes, no holes need to be made in the material.
With the WDH-318KC wood moisture meter, the moisture content of soft and hardwood can be checked quickly. This is useful, for example, before processing, during installation, or when assessing wooden components.
The measuring range reaches up to 53% for softwood and up to 35% for hardwood. This allows both normal material states and significantly increased moisture levels to be detected.
During damage restoration and building drying, it is important to regularly check the development of material moisture. The WDH-318KC provides a quick overview of which areas still exhibit increased moisture.
Especially after water damage, pipe bursts, or floods, affected areas can be investigated and compared with each other. Even in new buildings and renovations, the drying progress can be monitored before further work is carried out.
The WDH-318KC moisture indicator has four different measuring modes. This allows the measurement procedure to be adapted to different materials and areas of application.
| Measuring mode | Area of application |
|---|---|
| Softwood | Measurement of material moisture for various types of softwood. |
| Hardwood | Measurement of material moisture for various types of hardwood. |
| Masonry | Inspection of moisture distribution in masonry. |
| Walls / Ceilings / Floors | Relative moisture assessment for various mineral building materials and components. |
After water damage, it is often not enough to just assess the visible surface. Moisture can spread within building materials and also be present in deeper layers.
With the WDH-318KC, affected areas can be quickly checked and different measurement points can be compared with each other. This makes it easier to monitor the progress of a drying process.
| Area of application | Application |
|---|---|
| Water damage | Inspection of moisture in affected walls, floors, and ceilings. |
| Building drying | Monitoring the drying progress during dehumidification. |
| New construction | Checking material moisture before further construction and finishing work. |
| Renovation | Localization and comparison of damp areas during renovation work. |
| Wood processing | Checking wood moisture before processing or installation. |
| Damage assessment | Quick preliminary check and documentation of moisture areas on-site. |
| Model | WDH-318KC |
|---|---|
| Device type | Digital material moisture meter / moisture indicator |
| Measuring range softwood | 0% to 53% |
| Measuring range hardwood | 0% to 35% |
| Measuring range building materials | Relative values for walls, ceilings, floors, and masonry |
| Accuracy | ± 4% |
| Maximum measuring depth | 20 mm |
| Operating range | 0 °C to 40 °C |
| Permissible humidity | 0% to 70% RH |
| Power consumption | 35 mA |
| Battery | 9 V block battery |
| Display | LCD display with backlight and LED bar graph |
| Dimensions (H × W × D) | 170 × 75 × 30 mm |
| Weight | 186 g including battery |
| Color | Dark grey |
| Scope of delivery | Measuring device, 9 V battery, operating instructions |
The WDH-318KC can be used as a practical preliminary checking device before a more detailed moisture measurement using the CM method. Through quick, non-destructive comparative measurements, conspicuous or particularly damp areas can be identified.
For binding assessments of readiness for covering or other normatively relevant measurements, however, the respective prescribed or suitable measurement procedures should be used.
The WDH-318KC is a digital material moisture meter for non-destructive measurement of moisture in wood and various building materials. It is suitable for use on walls, ceilings, floors, and masonry, among other surfaces.
Yes. The WDH-318KC has a measuring mode for walls, ceilings, and floors as well as a separate mode for masonry. Measurement is performed non-destructively.
The maximum measuring depth of the WDH-318KC is about 20 mm. This also allows for the detection of moisture changes in deeper material areas.
Yes. The WDH-318KC has separate measuring modes for softwood and hardwood. The measuring range is up to 53% for softwood and up to 35% for hardwood.
Yes. The WDH-318KC operates non-destructively and requires no measuring needles or electrodes that must be inserted into the material.
Yes. The WDH-318KC is very well suited for checking drying progress during building drying, water damage recovery, and renovations. However, it only displays material moisture and does not remove moisture itself.
Yes. After water damage or leaks, the WDH-318KC can be used for quick inspection of affected walls, floors, ceilings, and other building materials.
The specified accuracy of the WDH-318KC is ± 4%. For mineral building materials, relative measurement values are used for comparison and orientation measurements.
The WDH-318KC has four measuring modes for softwood, hardwood, masonry, as well as walls, ceilings, and floors.
Yes. The LCD display of the WDH-318KC has a backlight, making it easy to read even in poor lighting conditions.
Yes. With the integrated data-hold function, the current measurement value can be frozen and then read comfortably.
The WDH-318KC is powered by a 9 V block battery. If left idle, the device automatically switches off after about two minutes.
The WDH-318KC weighs only about 186 g including the battery, making it particularly well-suited for mobile measurements on construction sites.
The WDH-318KC is suitable as a quick non-destructive preliminary check and for comparing different measurement points. For binding or normatively prescribed measurements, such as assessing readiness for covering, a suitable reference method like the CM method may be required depending on the application.
The WDH-318KC moisture indicator is a versatile and handy moisture meter for wood and building materials. Non-destructive measurement, four measuring modes, a digital display, and a measuring depth of up to 20 mm make it a practical tool for tradespeople, construction professionals, restoration companies, and DIY enthusiasts.
Further information on operation and the various measuring modes can be found in the operating instructions for the WDH-318KC.
Schneller Versand ab eigenem Lager in der oder ab dem Lager von Versandpartnern. Alle Lager befinden sich in der Schweiz, so dass keine zusätzlichen Kosten für Import oder Verzollung anfallen.
Auf alle Produkte erhalten Sie eine Garantie von 2 Jahren. Im unerwarteten Fall eines Problemes sind wir Ihre Kontaktstelle, damit schnell und unkompliziert Abhilfe geschaffen werden kann.
