ClimaTech YGL-60D Industrial Dehumidifier – 60 Litres
Professional building dryer and condensation dryer for construction sites, water damage restoration, basements and commercial premises
The ClimaTech YGL-60D is a powerful and exceptionally robust industrial dehumidifier designed for demanding drying applications. With a dehumidification capacity of up to 60 litres per day, the device is suitable for construction sites, water damage restoration, workshops, warehouses and basement rooms. The durable, rotationally moulded PE housing is designed for professional use. Thanks to an integrated condensate pump, automatic defrosting and the ability to stack up to three devices, the YGL-60D is a practical solution for tradesmen, restoration companies and professional landlords.
The industrial dehumidifier combines high dehumidification capacity with a well-thought-out design. The integrated condensate pump pumps the collected water up to 5 metres high. This allows the condensate to be drained even if there is no suitable floor drain directly next to the device.
Professional building dryer for demanding applications:
The ClimaTech YGL-60D offers up to 60 litres of dehumidification capacity per day, an integrated condensate pump, a robust PE housing and the ability to stack up to three devices. Ideal for professional drying work and regular use on construction sites.
The main advantages of the ClimaTech YGL-60D
-
Up to 60 litres of dehumidification capacity per day – powerful drying for professional applications.
-
Integrated condensate pump – automatically pumps the water up to 5 m high.
-
Robust PE housing – rotationally moulded construction for demanding operating conditions.
-
Stackable up to three devices – space-saving storage and practical logistics.
-
Automatic defrost function – electronically controlled defrosting for reliable operation in cooler conditions.
-
Continuous operation possible – including a 5 m drain hose and 5 m power cable.
-
Easy operation – LED display and electronic control.
-
Power-off memory – saves the last settings in the event of a power failure.
-
Activated carbon filter – supplements the air ducting with a filter unit.
-
Natural refrigerant R290 – modern refrigerant with low global warming potential.
Professional dehumidifier for construction sites and building drying
New builds, renovations and restorations often result in high moisture levels. Especially during structural work, screed work and painting, it is important to remove excess moisture from the room air in a controlled manner.
The YGL-60D industrial dehumidifier supports technical building drying and is suitable for various construction and restoration phases. Its dehumidification capacity of up to 60 litres per day makes it a powerful solution for professional drying applications.
Thanks to its compact design, large transport casters and integrated carrying handle, the device can be moved between different work sites. The robust housing is specially designed to meet the demands of professional everyday work.
Ideal for professional building drying:
The YGL-60D is suitable for structural work, construction sites, screed work, renovations and restorations. The actual drying time depends on factors such as room temperature, humidity, room volume and structural conditions.
YGL-60D for water damage restoration
After a burst water pipe, a leak or other water damage, excess moisture must be removed from the affected rooms as efficiently as possible. If moisture remains in walls, floors or the room air, this can lead to consequential damage.
The ClimaTech YGL-60D is suitable as a professional condensation dryer for technical dehumidification after water damage. It removes moisture from the room air and collects the resulting condensate, which can then be drained via the integrated pump.
- Suitable for drying after burst water pipes and leaks.
- Supports restoration work in damp rooms.
- Suitable for professional drying applications and service companies.
- Automatic condensate pumping up to 5 m high.
- Continuous water drainage without regular manual emptying.
Integrated condensate pump for flexible water drainage
A special advantage of the YGL-60D is the integrated condensate pump. Powerful building dryers generate a corresponding amount of condensate during operation, which must be drained reliably.
The built-in pump of the YGL-60D automatically transports the water up to 5 metres high. This makes the application more flexible, as the drain does not necessarily have to be at floor level.
A 5 m drain hose is already included in the scope of delivery. Together with the 5 m power cable, the device is prepared for continuous operation.
Practical for longer drying applications:
The integrated condensate pump enables automatic water drainage up to 5 m high. This eliminates the need to regularly empty a condensate tank manually.
Robust and stackable housing for professional use
On construction sites and during restoration work, a building dryer must withstand a lot. The ClimaTech YGL-60D therefore features a rotationally moulded housing made of durable PE plastic.
Another advantage is the stacking option. Up to three YGL-60D devices can be stacked on top of each other. This makes space-saving storage and transport of multiple devices easier, for example for drying companies and equipment rental companies.
- Durable rotationally moulded PE housing.
- Compact design for professional use.
- Carrying handle for easy handling.
- Two large transport casters.
- Stackable up to three devices.
Automatic defrosting and electronic control
The YGL-60D features an electronically controlled automatic defrost function. This supports reliable operation even in cooler operating conditions.
Operation is via an LED display and electronic control. Thanks to the power-off memory, the last used settings remain saved, so that the device can revert to the previous settings after a power failure.
Additional functions such as a safety lock as well as water and fault indicators complement the equipment and make monitoring the operation easier.
Technical equipment of the YGL-60D
- Electronic control with LED display.
- Power-off memory for saving the last settings.
- Safety lock.
- Water and fault indicator.
- Electronically controlled automatic defrosting.
- Integrated condensate pump.
- Activated carbon filter.
- Air circulation of 360 m³/h.
- Natural refrigerant R290.
Dehumidification capacity of the ClimaTech YGL-60D
The actual dehumidification capacity of a condensation dryer depends largely on the temperature and the relative humidity. At higher temperatures and higher humidity, the device can remove more water from the room air.
Depending on the ambient conditions, the YGL-60D achieves different dehumidification values:
| Temperature / Humidity |
Dehumidification capacity |
| 32 °C / 90 % RH |
Up to 70 litres per day |
| 30 °C / 80 % RH |
Up to 60 litres per day |
| 27 °C / 60 % RH |
Approx. 35 litres per day |
The values show why ambient conditions should be taken into account when selecting a building dryer. The maximum capacity of 70 litres per day is only achieved under the corresponding test conditions.
Suitable application areas of the YGL-60D
The ClimaTech YGL-60D was developed for professional dehumidification work in various areas. Depending on the moisture load and room conditions, it is suitable for rooms with an area of approximately 45 to 60 m².
| Application area |
Application |
| Construction sites |
Support for building drying during structural and renovation work. |
| Water damage |
Technical dehumidification after leaks and water damage. |
| Screed work |
Support for drying during the construction phase. |
| Painting work |
Reduction of excess moisture in work rooms. |
| Warehouses and logistics |
Control of elevated humidity in warehouse areas. |
| Archives |
Support for regulating room humidity. |
| Basement rooms |
Dehumidification of damp basement and auxiliary rooms. |
| Workshops |
Reduction of moisture in commercially used rooms. |
Technical data ClimaTech YGL-60D
| Model |
YGL-60D |
| Brand |
ClimaTech |
| Device type |
Professional condensation dryer / Industrial dehumidifier |
| Dehumidification capacity |
Up to 60 litres per day at 30 °C / 80 % RH |
| Maximum dehumidification capacity |
Up to 70 litres per day at 32 °C / 90 % RH |
| Dehumidification capacity at 27 °C / 60 % RH |
Approx. 35 litres per day |
| Recommended room size |
Approx. 45–60 m², depending on operating conditions |
| Air circulation |
360 m³/h |
| Condensate pump |
Integrated, pumping height up to 5 m |
| Drain hose |
5 m, included in the scope of delivery |
| Power cable |
5 m, included in the scope of delivery |
| Defrost function |
Automatic, electronically controlled |
| Filter |
Activated carbon filter |
| Housing |
Rotationally moulded PE housing |
| Stackability |
Up to three devices |
| Operation |
LED display and electronic control |
| Memory function |
Power-off memory |
| Refrigerant |
R290 |
| Item number |
0000000000506 |
Who is the YGL-60D suitable for?
The ClimaTech YGL-60D industrial dehumidifier is aimed particularly at users who need a robust and powerful device for regular or longer drying applications.
Particularly suitable for:
Construction companies, restoration companies, water damage specialists, tradesmen, property management, professional equipment rental companies and operators of warehouse and workshop spaces.
Thanks to the integrated condensate pump, the durable housing and the stacking option, the YGL-60D is also interesting for companies that use and transport multiple building dryers.
For particularly large buildings, very high moisture loads or extensive water damage, the required drying capacity should be assessed based on the actual room situation and the extent of the damage.
Tips for efficient building drying
- Keep windows and doors closed as much as possible during dehumidification operation.
- Ensure sufficient air circulation around the device.
- Connect the condensate drain correctly and check the water routing.
- For longer applications, use continuous operation via the condensate pump.
- Regularly check the room temperature and humidity.
- In the event of water damage, also professionally check the moisture in walls and floors.
- Regularly check the filter and clean or maintain it according to the manufacturer's instructions.
Frequently asked questions about the ClimaTech YGL-60D
How many litres does the YGL-60D dehumidify per day?
The ClimaTech YGL-60D achieves a dehumidification capacity of up to 60 litres per day at 30 °C and 80 % relative humidity. Under particularly warm and humid conditions, up to 70 litres per day are possible.
Is the YGL-60D suitable for professional building drying?
Yes. The YGL-60D was developed for professional applications and is suitable for structural drying, screed work, renovations and restorations after water damage, among other things.
Does the YGL-60D have an integrated condensate pump?
Yes. The device features an integrated condensate pump that can automatically pump the collected water up to 5 m high.
Can the YGL-60D run continuously?
Yes. The YGL-60D is designed for longer drying applications. Thanks to the integrated condensate pump and the included 5 m drain hose, the water can be continuously drained.
How many YGL-60D devices can be stacked?
Up to three devices can be stacked on top of each other. This is particularly practical for space-saving storage and transport of multiple building dryers.
For what room size is the YGL-60D suitable?
As a guideline, a room size of approximately 45 to 60 m² is recommended. The actually suitable area depends on the temperature, humidity, room volume and moisture load.
Is the YGL-60D suitable for drying after water damage?
Yes. The professional condensation dryer is suitable for technical dehumidification after leaks and water damage. For larger damage, the moisture in walls, floors and other building components should also be professionally checked.
What dehumidification capacity does the device achieve under different conditions?
At 30 °C and 80 % relative humidity, the YGL-60D achieves up to 60 litres per day. At 32 °C and 90 % relative humidity, up to 70 litres per day are possible. At 27 °C and 60 % relative humidity, the capacity is around 35 litres per day.
Does the YGL-60D have an automatic defrost function?
Yes. The electronic control takes over the automatic defrosting and supports reliable operation even in cooler operating conditions.
How is the YGL-60D operated?
Operation is via an LED display and electronic control. The device also features power-off memory, a safety lock as well as water and fault indicators.
What refrigerant does the YGL-60D use?
The ClimaTech YGL-60D uses the natural refrigerant R290.
What cable lengths are included in the delivery?
The delivery includes a 5 m power cable and a 5 m drain hose for condensate removal.
Does the YGL-60D have an activated carbon filter?
Yes. The YGL-60D is equipped with an activated carbon filter.
Buy the ClimaTech YGL-60D at Arwin
The ClimaTech YGL-60D is a professional industrial dehumidifier for demanding drying tasks. With up to 60 liters of dehumidification capacity per day, an integrated condensate pump and a robust, stackable housing, it offers a well-thought-out design for construction sites, water damage restoration, workshops and commercial applications.
Particularly practical are the automatic condensate removal at heights of up to 5 m, the electronic control and the option to stack up to three devices on top of each other to save space.
Expert tip:
When choosing a professional construction dehumidifier, the maximum dehumidification capacity should not be the only consideration. The room size, temperature, existing humidity and the planned duration of use are also crucial. For regular drying tasks and professional water damage restoration, the ClimaTech YGL-60D is a powerful solution.